[8-Ports Giga PoE+] LINKSYS 8-Ports Smart PoE+ Switch with 72W power budget - LGS308P
Tính năng kỹ thuật : 8 Port 10/100/1000 Mbps. 8 Port PoE+, Cống suất tối đa :72W
CPU MEMORY DRAM : 128MB; FORWARDING RATE : 11.90Mpps; SWITCHING CAPACITY : 16Gbps.
MAC Address : 8K; JUMBO Frame (FE,GE) : 9K; Number of VLANs : 128 active VLANs (4,096 range).
Proven Performance and Reliability, Easy Configuration and Management, Advanced Network Security, IPv6 Support.
Thiết kế vơ sắt.
[8-Ports Giga PoE+] LINKSYS 16-Ports Gigabit PoE+ Switch with 80W power budget - LGS116P
Tính năng kỹ thuật : 16-port GB switch with 8 ports PoE+ (Port 1-8), PoE power budget of 80W.
Bandwidth : 32 Gbps.
Performance: Full line rate and forwarding rate of 64B frame at: 1.488Mpps for 1000M port; 0.1488Mpps for 100M port; 0.01488Mpps for 10M port.
Thiết kế vơ sắt.
[8-Ports Giga PoE+] CISCO 8-Ports Gigabit PoE+ Switch with 62W power budget - SG300-10PP-K9
Tính năng kỹ thuật : 8 PoE+ gigabit ports (Công suất tối đa mỗi port 30W(IEEE 802.3at PoE), Công suất tối đa switch 62W); 2 Combo mini-GBIC ports.
Performance: Switching capacity 20.0 Gbps, nonblocking, Forwarding rate 14.88 mpps wire-speed performance.
Layer 2: Port grouping up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation, Number of VLANs 256 active VLANs (4096 range), Head-of-line (HOL) blocking HOL blocking prevention.
Layer 3: IPv4 routing Wirespeed routing of IPv4 packets, Up to 512 static routes and up to 128 IP interfaces, Classless Inter-Domain Routing (CIDR) support for CIDR.
QoS: Priority levels 4 hardware queues, Scheduling Priority queuing and weighted round-robin (WRR), Queue assignment based on DSCP and class of service (802.1p/CoS).
[8-Ports Giga PoE+] CISCO 8-Ports Gigabit Maximum PoE+ Switch with 124W power budget - SG300-10MPP-K9
Tính năng kỹ thuật : 8 PoE+ gigabit ports (Công suất tối đa mỗi port 30W(IEEE 802.3at PoE), Công suất tối đa switch 124W); 2 Combo mini-GBIC ports.
Performance: Switching capacity 20.0 Gbps, nonblocking, Forwarding rate 14.88 mpps wire-speed performance.
Layer 2: Port grouping up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation, Number of VLANs 256 active VLANs (4096 range), Head-of-line (HOL) blocking HOL blocking prevention.
Layer 3: IPv4 routing Wirespeed routing of IPv4 packets, Up to 512 static routes and up to 128 IP interfaces, Classless Inter-Domain Routing (CIDR) support for CIDR.
QoS: Priority levels 4 hardware queues, Scheduling Priority queuing and weighted round-robin (WRR), Queue assignment based on DSCP and class of service (802.1p/CoS).
[8-Ports Giga PoE+] HP 1910-8G-PoE+ Switch with 65W power budget- JG349A
Tính năng kỹ thuật : Ports : 8 RJ-45 autosensing GB PoE+ ports (Cống suất tối đa :65W, port : 30W) + 1 RJ-45 dual-personality 10/100/1000 ports or SFP + 1 RJ-45 serial console port.
Memory and processor : ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB.
Support : Layer 3 services ARP and DHCP relay, Layer 3 routing : NEW Static IPv4/IPv6 routing: provides basic routing (supporting up to 32 static
routes and 8 virtual VLAN interfaces); allows manual configuration of routing.
Support : Quality of Service (QoS); Management; Connectivity; Layer 2 switching; Security; Convergence; Resiliency and high availability.
Performance : 100 Mb Latency < 5 µs; 1000 Mb Latency < 5 µs; Throughput 13.4 million pps; Routing/Switching capacity 18 Gbps.
[8-Ports Giga PoE+] HP 1920-8G-PoE+ Switch with 180W power budget - JG922A 8 port 10/100/1000 Mbps + 2 slot SFP.
Tính năng kỹ thuật : Ports : 8 autosensing 10/100/1000 PoE+ ports (Cống suất tối đa :180W, port : 30W); 2 Gigabit SFP ports.
Memory and processor : MIPS @ 500 MHz, 32 MB flash, 128 MB SDRAM; packet buffer size: 4.1 Mb.
Performance : 100 Mb Latency < 5 µs; 1000 Mb Latency < 5 µs; Throughput up to 14.8 million pps; Routing/Switching capacity 20 Gbps; Routing table size 32 entries.
Support : Quality of Service (QoS); Management; Connectivity; Layer 2 switching; Security; Convergence; Resiliency and high availability.
Layer 3 services : Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network; DHCP relay: simplifies management of DHCP addresses in networks with multiple subnets.
Layer 3 routing : NEW Static IPv4/IPv6 routing: provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual configuration of routing.